You have no items in your shopping cart
You Are In: Anchors & Bolts
Anchors & bolts for climbing, rappelling, rescue, rope access & industrial use.
BAT'INOX 14 mm resin anchor. Especially suited for soft rock. Textured stem for better application and adhesion of resin.
Multi-directional, stainless steel Bolt Hanger. Two diameters available: 10 mm and 12 mm
CMC Rescue Micro-Anchor Plates UL Classified to NFPA 1983 - General Use Ultra compact and light, the Micro-Anchor Plate is a good choice when weight and size are an issue, such as mountain rescue...
When rigging a stretcher for a high line (Tyrolean), this dropforged alloy steel connection point allows you to attach control lines, a litter harness, and pulleys, all at one strong point without twisting.
The Fixe #038 Stainless Steel Hanger is currently the strongest hanger available, rated at 30kn/6750lbs it has twice the strength of most other hangers. The #013 Plated Steel Hanger is rated at 22kn/4...
The Fixe Ring Anchor is our most popular Top Anchor unit. A pair of Ring Anchors make an excellent anchoring system for any type of route. Ring Anchors should be placed on the same horizontal plane, a...
The Rawl 5-Piece sleeve bolt is a construction grade fastener that is commonly used as a climbing anchor. Expansion is created by tightening a threaded bolt which draws a tapered cone expanding a slee...
SDS drill bits are standard for use in most power drills. Most hand drill systems also accept SDS drill bits. Our SDS bits are carbide tipped and can be re-sharpened. Be aware that as your SDS drill b...
The Chain Anchor was developed at the request of many customers. The unit is designed to be used in pairs or with another Top Anchor unit. When used with a Ring or Double Ring Anchor an excellent Top ...
Stainless Steel Double Ring Anchor is our strongest Top Anchor. Each #211 unit is rated to 40kn/10000lb. These units make excellent Top Anchors on multi pitch routes. The high strength and double ring...
Fixe Rappel Rings are made from 11mm (about 3/8") rod stock and are T.I.G. welded. Whether used with conventional sling material or screwlinks and chain, Rappel Rings complete an effective Top An...
The Fixe Traditional Anchor is designed for any type of route. This Top Anchor unit is ideal for multi pitch climbs. Multiple attachment points offer many options for belay and bivy set-ups. The ancho...
Fixe Wedge Bolts are designed for rockclimbing. We use (AISI-303) Stainless Steel rod stock to manufacture our Stainless Steel Models. The threads are stamped, not milled to ensure the hig...
Anchor strap with Forged steel D-rings on the ends.
Wrapped around a beam, the new PMI Choker sling provides a quick and safe anchor. An extra piece of webbing is sewn on the entire length of the sling to protect it from sharp edges and prolong its l...
Simple, low cost focal point for rigging. This is a “bombproof” forged steel ring that is ideal for any multi-directional loading situation. Lbs/kN: 10,000/44 Weight: 9 oz (256 grams) Color: Gold...
This anchorage is designed to fit I-beams from 3 to 8.25 inches. Simple installation, removable. Meets ANSI, CSA, and OSHA 5400lbs (24kN) anchorage requirements. Fallstop Beam Clamp, one person. We...
SMC Descending Rings are a one-piece aluminum ring whichare intended to be placed at the top of a pull down rappel in place of a carabiner in order to facilitate recovery of ropes. Low cost means you ...
The SMC Rigging Ring is the strongest aluminum ring of its size in th market and is only limited by your imagination and rigging expertise. The SMC Rigging Ring was designed as the ultimate clim...
New bolts require clean holes. Remove dust with a Blow-Out Bulb and heavy duty Bolting Brush....
When placed properly in good stone glue-in bolts are the strongest anchors available. Patience and experience are required when installing glue-in bolts. The mixing and installation of the glue is the...