You have no items in your shopping cart
You Are In: PETZL
Self-braking descender with anti-panic function for working on fixed ropes. Designed for work on a rope: the gate on the swinging side plate helps prevent dropping the device...
Black Cordex Plus Lightweight belay/rappel gloves. Natural, high-quality leather with reinforced palm. Durable double layer of leather in high-wear areas (fingertips, palm, between thumb and index finger.) The back is made of durable leather with abrasion-resistant stretch nylon at key flex areas. Low profile neoprene cuffs with Velcro® closure. Carabiner hole to attach gloves to harness.
Lightweight belay/rappel gloves. Natural, high-quality leather with reinforced palm. Durable double layer of leather in high-wear areas (fingertips, palm, between thumb and index finger.) The back is made of durable leather with abrasion-resistant stretch nylon at key flex areas. Low profile neoprene cuffs with Velcro® closure. Carabiner hole to attach gloves to harness.
Non-adjustable dynamic rope lanyard with MGO Connector. Can be combined with an ABSORBICA energy absorber to set up an energy-absorbing «I» or «Y» lanyard of less than two meters in length. Sewn ends protected by plastic sheath to hold the connector in place and protect the terminations from abrasion. Large-opening MGO connector for attachment to metal structures, cables and large diameter bars (large-opening, auto-locking connector permanently sewn into the lanyard termination.) JANE MGO 0.6 m (L53 60): 565 g. JANE MGO 1 m (L53 100): 585 g. JANE MGO 1.5 m (L53 150): 640 g.
Descender for canyoning. The PIRANA descender offers multiple braking options and can be installed on the rope without removing it from the harness. Designed for use with canyoning descent techniques.
Multi-directional, stainless steel Bolt Hanger. Two diameters available: 10 mm and 12 mm
The original mini-HMS carabiner has been redesigned to be ultralight. Through a series of scientific calculations the ATTACHE 3D has been reduced to a mere 55 g by removing all unnecessary material while maximizing the strength. The new 3D shape offers the versatility of the original ATTACHE for use in a wide variety of situation while reducing the mass and increasing the gate open strength. The rope bearing surfaces have been optimized to balance fluidity with a minimum of excess weight. Overall the ATTACH 3D combines the versatility of a mini-HMS carabiner in a compact, light frame for fast and light adventures.
Highly efficient double Prusik pulley. Special side plates designed for use with a Prusik friction hitch in progress capture systems. Parallel mounted sheaves and auxiliary attachment point for creating different types of hauling systems, including the most complex. Large diameter sheaves mounted on sealed ball bearings for excellent efficiency. Accepts up to three carabiners to facilitate use.
Tools accessed and organized with one hand. Flat top aids in sorting hung gear. Small hole on top for attaching keeper cord, to prevent dropping critical gear. Slips through the waistbelt slots or along the harness webbing and stays in place, thanks to its stabilizing clip.
The size and shape of this carabiner make it popular for many uses: connecting a belay device to a harness, belaying with a Munter hitch and as a multi-purpose carabiner for use at belay stations. Compact, lightweight and easy to handle. Pear shape facilitates use with the Munter hitch for single ropes Keylock system. Available in SCREW-LOCK system only (with lock indicator.)
BAT'INOX 14 mm resin anchor. Especially suited for soft rock. Textured stem for better application and adhesion of resin.