Accepts ropes up to 13mm.
As one of our newest pulleys, the 2” PMP is sized to fit between our Micro PMP and 3” PMPs and represents a mid-sized option for those needing the unique features of a PMP. We believe this pulley to be one of the lightest UL Certified pulleys meeting NFPA “G” General Use. In fact, the 3 Sigma test numbers for this pulley are some of the highest available based upon the strength to weight ratio. Prusik Minding Pulleys are especially versatile and may be used in many ways, from progress capture and hauling systems to crevasse rescue, high-lines and Tyrolean traverses. The wide base design maximizes the effectiveness of a Prusik hitch while a unique side plate formation allows the use of larger ropes in a compact pulley. An oversized bell-shaped top hole accepts 2 large rescue carabiners or multiple small carabiners and allows the carabiners to be rotated freely and completely. Sealed ball bearing provide optimal efficiency and reduce the performance-robbing resistance that is inherent in most multiple component systems. In addition, sealed ball bearings are not prone to failure under misaligned loads or with twisted gear as can be the case with needle bearings. Solid side plates help prevent foreign object access and reduce snagging and are precisely tensioned for easy one-handed operation and secure placement at any point along the rope. Offered with either Green and Black side plates or all Black side plates.
All SMC NFPA products are third party tested (by Underwriters Laboratories - UL) as required by NFPA 1983 (2006 edition) standards.
All SMC NFPA pulleys have the required certification information stamped on the side plate and the user information is enclosed with each item as required by NFPA.