Originally designed for single rope descents in caving, the Stop has become a standard tool for the rope access worker. The Stop is designed to automatically "stop" the descent when the red handle is not depressed. To descend, push the handle to release the brake and control the descent with your brake hand. A safety catch allows the rope to be rigged without disconnecting the Stop from your harness.

For descents on single rope.

• Swinging side plate with safety catch:
  • decreases risk of dropping device,
  • allows rapid installation of the rope into the device,
  • Increases efficiency when passing intermediate anchor points.
• Self-braking system activates when the handle is released.
• The rate of descent is controlled by varying the grip on the free end of the rope.
• Ascending the rope is possible without changing the position of the STOP by adding a footloop and a handled rope clamp / grab.

Technical specifications :

• Individually tested.
• For rope diameters 10 to 11 mm
• Weight 11.5 oz (326g)

CE EN 341 Class A