The Shack is your complete source for everything outdoors. We specialize in hiking, climbing, kayaking and much more. Our team can fit you to your perfect shoe and get you on the trail in no time. Whether you want to purchase equipment, rent gear or just take a class to learn more, we have what you need to make the best of your getaway.
Visit: HIKING SHACK
Contact: HIKING SHACK's Contact
Phone: (800) 964-1673
Facebook: HIKING SHACK's Facebook
Twitter: HIKING SHACK's Twitter
Youtube: HIKING SHACK's Youtube
Adjustable positioning lanyard with BlueWater ArmorTech™ Rope Lanyard and ISC RAD Adjuster. Certified to ANSI.
Adjustable positioning lanyard with BlueWater ArmorTech™ Rope Lanyard and ISC RAD Adjuster. Lanyard is made from 12mm" BlueWater ArmorTech™ Rope for increased durability over sharp edges. Rope is dry coated with a Teflon™ compound to reduce water absorbtion. The outer sheath of ArmorTech™ rope is 100% Technora™ which is extremely fire resistant with a melting point over 900 degrees. The New rope adjusting mechanism from ISC in Wales is the RAD. The RAD is the only rope adjuster of its kind to Pass ANSI Z359.3-2007 "Safety Requirements for Positioning and Travel Restraint Systems".
• RAD is now available Technora Rope Lanyards with 2 meters of adjustable length. Lanyard comes with Captive Eye three stage ANSI aluminium carabiner. Lanyard strength 4500 lbf. (20kN) Tested in position of use in single leg attaghment configuration.
• BlueWater 12mm ArmorTech™ Rope Lanyard. with Teflon dry coating. 6,600 lbf. (29 kN).
• Aluminum captive eye carabiner located on lanyard end meets 3600 lbf. (15kN) side load gate strength requirements of ANSI Z359.12-2009 standard.
• Meets ANSI/ASSE Z359.3-2007, ANSI/ASSE Z359.12-2009 and EN12841:2006-C Standards.
• RAD only meet ANSI Certification if configured with 12mm Armortech Lanyards. RAD w/Lanyard attached are now marked to be compliant with ANSI Z359.3-2007 (Safety Requirements for Positioning and Travel Restraint Systems)
ISC ANSI 1135 Carabiner is secured to with retainer pin to RAD so that it is not removable.
ISC ANSI 1135 CARABINER IS CERTIFIED TO MEET ANSI/ASSE Z359.12-2009 STANDARD
|Origin||Made in USA|
|Strength||4.500 lbf. (20kN)|